RC Drilling Rigs
The UDR RC400 has been custom built for Egan Drilling. The Main feature being all equipment is contained onboard the rig including Booster, Sampling System, Dust Suppression and Storage for up to 300m Rods.
This will enable clients to drill RC up to 300m deep on tight drill pads as no support trucks or sample trailers etc are required. The 8 wheel drive mercedes has diff lock and hub reduction allowing access to the most difficult sites. Pad sizes range from 13m L x 10m W for angled holes and even less for vertical holes.
FEATURES AND SPECIFICATIONS
|Carrier||Mercedes 4144 8×8|
|Air Capacity||1470 CFM @ 900psi|
|Booster||1400 CFM Hurricane|
|Depth Capacity||400m RC|
|Auto Rod Handler||UDR KL|
|Dust Suppression||Dry Element|
|Sampling||UDR Cone Splitter|
|Auto Rod Breakout||Airdrill|
|Low Noise||Engine runs @ 1800 rpm|
|Fire Suppression||SDS Ausminco|